Designed by CEDIM, Within the context of double-layered shells in architecture, there is wide contemporary research which is bringing relevant advancement in lightweight applications and structural performance for large span construction. Such topics have been explored during the last eight years by educational institutes such as the Institute for Computational Design and Construction ICD, the Institute of Building Structures and Structural Design ITKE and the Centre for Information Technology and Architecture CITA, creating the ground for this research.
Bending Bridges focuses on the development of a double-layered construction system for a free-standing load-bearing lightweight wooden structure, through global double curvature, and local active bending principle. The project aim is the design and construction of a pedestrian bridge exploiting the elastic bending capacity of standard thin plywood.
Photography: Héctor Pineda
The design explores structurally complex curved forms that fulfill both architectural and structural constraints. The arch and the surface curvature were designed and optimized through computational structural analysis to carry loads directly to the foundation, allowing to withstand the weight of 5 people crossing the bridge while guaranteeing structural integrity with minimum displacement. The bridge’s global design has been driven by a spline-like curve, which allows having an optimal distribution of forces while keeping minimum bridge inclinations on the bottom and top of the arch.
Photography: Héctor Pineda
In order to allow the assembly of doubly-curved geometries, discretization of strip patterns were introduced in the design process, generating a series of unique curvy-linear unrollable members. The segmentation strategy adopted is intrinsically connected to the assembly sequence of the bridge, which is built section by section from two sides towards the center. The double-layer system was integrated into such process, which allowed to fix in place the curvature of each section without spring back while maintaining internal stress forces used as stiffening factor.
Exploring heat and humidity as material treatment, an efficient wood steaming method was developed in order to hygroscopically enhance the material bending properties allowing the assembly of a wider range of bent geometries and making the on-site manipulation of the material much easier. The steaming system included a wooden box, a gas tank, a custom stove, sealed pots, stretchable aluminum pipes, and a hygrometer.
Photography: Héctor Pineda
All the bridge members and connections are unique, digitally fabricated with CNC machines, computationally designed in the 3D model and then materialized through CNC milling codes. The entire construction process programmed fabrication and assembly stages to run parallelly. Although the development of the construction system took almost a year, the project’s fabrication and construction phases took only 4 weeks. The final demonstrator of the research has a constant cross-section of 9 cm, a span of 12m and a maximum height of 2.5m.
Methods
Project Info:
Architects: CEDIM
Location: Mexico
Lead Architects: Djordje Stanojevic
Design Team: Linda G. Carmona, Grecia C. Cortes, Ivan A. Durán, Mónica V. García, José L. García, A. Karen Garza, Isaac E. Garza, Patricia Gutiérrez, Denise Llano, Frania Y. Logan, Sergio Martinez, Carlos A. Muñoz, Alberto Ortega, J. Adrián Reyna, Ma. Fernanda Ruíz and Jesús E. Villalobos.
Area: 484.37 ft2
Project Year: 2018
Photographs: Héctor Pineda
Manufacturers: CEMEX, Home Depot, Pinturas Osel, Robert McNeel & Associates
Project Name: Bending Bridges
The post Bending Bridges | Centro de Estudios Superiores de Diseño de Monterrey, CEDIM appeared first on Arch2O.com.
https://www.arch2o.com/bending-bridges-centro-de-estudios-superiores-de-diseno-de-monterrey-cedim/ July 25, 2019 at 03:05PM https://www.arch2o.com/wp-content/uploads/2019/07/Arch2O-Bending-Bridges-Centro-de-Estudios-Superiores-de-Dise%C3%B1o-de-Monterrey-CEDIM-14-700x425.jpg
No comments:
Post a Comment