Wednesday, November 8, 2017

Äripäev Office | Arhitekt 11

Arch2O.com
Arch2O.com - Architecture & Design Magazine

The inspiration for planning the Äripäev office was a very special factory building built at the beginning of the 20th century and the media company’s wish for an open office for 280 employees. Äripäev is Estonia’s most famous and largest business newspaper, radio and publishing company.

Courtesy of Arhitekt 11 – Photographs : Tõnu Tunnel

The chosen space, Luther’s Machine Room, is a former Luther plywood manufacturing plant, one of the largest industrial buildings in the Baltic States from that time. The office space has a maximum height of 12.6m, office length 63.7m and a width of 38.3m. Äripäev office has a total of 2739 m², of which 2326 m² is located on the main office floor.

Courtesy of Arhitekt 11 – Photographs : Tõnu Tunnel

A modern open-space media company office for 280 people has been created in this historic space with activity-based working principles. The working landscape is on the outer perimeter of the space, moving to the center there are open and closed meeting rooms and in the center is a public space with a library and work-cafe.

Courtesy of Arhitekt 11 – Photographs : Tõnu Tunnel

Existing materials like limestone walls and concrete posts, beams, and ceilings have been preserved and cleaned. 50% of the closed glass nave has been opened up. In order to exhibit the unique constructions of the building, there is a small atrium between the ground floor and the main floor, from where a whole constructive post can be seen from top to bottom.

Courtesy of Arhitekt 11 – Photographs : Tõnu Tunnel

Inspired by the birch veneer produced in Luther’s factory in the first half of the 20th century, plywood boards are used as a finishing material for the „room inside a room“ objects. The objects – meeting rooms covered with plywood form an intermittent and interesting landscape on the human level and leave the concrete body of a dignified factory building untouched.

Courtesy of Arhitekt 11 – Section

Inner streets form between the objects, where the light from the top and the trees create an outdoorsy feel. The biggest challenge was to achieve the acoustics needed for working. Since there are not enough wall surfaces, all closed ceilings are covered with acoustic wool boards.

Courtesy of Arhitekt 11 – Photographs : Tõnu Tunnel

There are also many acoustic materials used in the furniture – the screens on tables, the backs of cabinets, telephone chairs. Acoustic measuring and feedback from employees of Äripäev are proof that the results are satisfying.

Courtesy of Arhitekt 11 – Section

Project Info :

Architects : Arhitekt 11
Project Year : 2017
Project Area : 2739.0 m2
Photographs : Tõnu Tunnel
Manufacturers : Desso, Borg, Martela
Project Location : Vana-Lõuna 39, 10134 Tallinn, Estonia
Interior Architecture : Illimar Truverk, Hannelore Kääramees, Kaur Käärma, Tiiu Saal

The post Äripäev Office | Arhitekt 11 appeared first on Arch2O.com.

https://www.arch2o.com/aripaev-office-arhitekt-11/ November 08, 2017 at 09:30PM https://www.arch2o.com/wp-content/uploads/2017/11/Arch2O-%C3%84rip%C3%A4ev-Office-Arhitekt-11-003-e1510130244982-750x400.jpg

No comments:

Post a Comment